Maintenance Schedule as Provided by OEM Documentation
Distance: 7,500 miles (12,000 km) | Action: Rotate | Item: Wheels & tires | Interval in Month(s): 6 | Labor Units: 0.1 | Parts Units: 0 | Drive Type: ALL |
Description: A circular frame of hard material that may be solid or partly solid, is capable of turning on an axle, and holds the rubber cushion that contains compressed air. |
Distance: 7,500 miles (12,000 km) | Action: Lubricate | Item: Front drive shaft boots | Interval in Month(s): 6 | Labor Units: 0.1 | Parts Units: 0 | Drive Type: 4WD |
Description: Rubber seals covering the central shaft that the front wheels rotate on. |
Distance: 7,500 miles (12,000 km) | Action: Lubricate | Item: Tie rod ends | Interval in Month(s): 6 | Labor Units: 0.1 | Parts Units: 0 | Drive Type: 4WD |
Description: Ball and socket parts of the steering linkage that connect the wheel spindles to the rack and pinion or center link. |
Distance: 15,000 miles (24,000 km) | Action: Change | Item: Engine oil | Interval in Month(s): 6 | Labor Units: 0.48 | Parts Units: 12 | Drive Type: ALL |
Description: A substance that lubricates and cools the moving parts of the engine and reduces corrosion and the formation of rust. |
Distance: 15,000 miles (24,000 km) | Action: Replace | Item: Oil filter | Interval in Month(s): 6 | Labor Units: 0.1 | Parts Units: 1 | Drive Type: ALL |
Description: A cartridge-filled canister placed in an engine's lubricating system to strain dirt and abrasive materials out of the oil. |
Distance: 15,000 miles (24,000 km) | Action: Replace | Item: Fuel filter | Interval in Month(s): 60 | Labor Units: 0.3 | Parts Units: 1 | Drive Type: ALL |
Description: A replaceable metal or plastic canister that prevents particulate matter and most contaminants in the fuel from reaching the engine. |
Distance: 22,500 miles (36,000 km) | Action: Adjust | Item: Parking brake | Interval in Month(s): 18 | Labor Units: 0.4 | Parts Units: 0 | Drive Type: ALL |
Description: The mechanical brake connected by cables to either a ratcheting hand lever or foot pedal used to hold or apply a vehicle's rear and sometimes front brakes while left unattended or under conditions of hydraulic circuit failure. Sometimes referred to as the emergency brake. |
Distance: 22,500 miles (36,000 km) | Action: Inspect/replace | Item: Brake linings | Interval in Month(s): 12 | Labor Units: 0.1 | Parts Units: 0 | Drive Type: ALL |
Description: High-friction, heat-resistant material that is attached to the brake shoes in a rear drum brake system. |
Distance: 22,500 miles (36,000 km) | Action: Replace | Item: Drive belt(s) | Interval in Month(s): 48 | Labor Units: 1.5 | Parts Units: 1 |
Drive Type: ALL |
Description: A belt that transfers the rotation of the engine through the crankshaft pulley to drive various devices, such as the alternator, water pump, air conditioning compressor or power steering pump. |
Distance: 30,000 miles (48,000 km) | Action: Inspect | Item: Transfer case fluid | Interval in Month(s): 30 | Labor Units: 0.1 | Parts Units: 0 | Drive Type: 4WD |
Description: Lubricant used in the transfer case. |
Distance: 60,000 miles (96,000 km) | Action: Inspect | Item: Front wheel bearings & grease seals | Interval in Month(s): 30 | Labor Units: 0.1 | Parts Units:
0 | Drive Type: ALL |
Description: The assemblies that permit smooth rotation of the wheel hub as it's mounted to the spindle. |
Distance: 100,000 miles (160,000 km) | Action: Change | Item: Automatic transmission fluid | Interval in Month(s): 60 | Labor Units: 0.5 | Parts Units: 4.2 | Drive Type: ALL |
Description: The fluid used for lubricating and cooling an automatic transmission. |
Distance: 100,000 miles (160,000 km) | Action: Replace | Item: Automatic transmission filter(s) | Interval in Month(s): 60 | Labor Units: 0.3 | Parts Units: 1 | Drive Type: ALL |
Description: A component in most automatic transmissions that is fitted over the fluid intake, usually in the pan, that prevents debris and other contaminants from circulating throughout the transmission's inner workings and potentially causing unnecessary wear or damage. Some transmissions use a reusable metal or nylon mesh-type screen in place of a disposable filter. |
Distance: 102,000 miles (163,200 km) | Action: Flush/replace | Item: Coolant | Interval in Month(s): 60 | Labor Units: 0.5 | Parts Units: 7 | Drive Type: ALL |
Description: Also known as "antifreeze." A mixture of water and ethylene glycol that has both a higher boiling point and a lower freezing point than plain water. |
Distance: 120,000 miles (192,000 km) | Action: Replace | Item: Transfer case fluid | Interval in Month(s): 30 | Labor Units: 0.1 | Parts Units: 1 | Drive Type: 4WD |
Description: Lubricant used in the transfer case. |
Distance: 150,000 miles (240,000 km) | Action: Adjust | Item: Valve clearance | Interval in Month(s): 18 | Labor Units: 0.9 | Parts Units: 0 | Drive Type: ALL |
Description: The maximum amount of space between a rocker arm or cam and the part it contacts to actuate a valve. |