Product Listing by Category | Become an AMSOIL Dealer
This Item Has Been Discontinued Effective October 1 2009 (or while supplies last)
The AMS-Oiler® is a high-tech oil pre-charger that puts an end to potential dry-engine starting. Typically, an engine that has sat for even a short period of time will operate relatively dry upon starting before oil is able to fully lubricate the system.
Product Applications
While every engine could benefit from use of an AMSOiler®, vehicles especially prone to frequent starting, such as taxicabs, delivery fleets, marine applications, service vehicles and many family and personal vehicles, would extend their engine life with the simple addition of an AMS-Oiler®.
Engines that sit idle for extended periods of time, such as in farm, service, recreation or marine equipment, are given more time for the oil to drain down, resulting in increased wear during dry-starting. An AMS-Oiler® can provide the instant lubrication necessary to save these engines significant wear and prevent damaging metal-on-metal contact.
Product Description
The AMS-Oiler® is a high-tech oil pre-charger that puts an end to potential dry-engine starting. Typically, an engine that has sat for even a short period of time will operate relatively dry upon starting before oil is able to fully lubricate the system. The AMS-Oiler® operates as an engine oil reservoir, charged under pressure directly from the oil pump output during normal engine operation. Upon turning the ignition key to the on position, up to 160 cc's (5.4 oz.) of oil are discharged from the reservoir to engine surfaces, building oil pressure and providing vital lubrication.
Performance
Operation
The AMS-Oiler® outperforms gas and air charge systems. With the turn of a key to the on position, an audible 95 db signal will sound for two seconds while a 12-volt DC solenoid initiates the unit's operation. When the oil delivery process is complete, the signal will cease and the operator can start the engine. The absence of a gas or air charge eliminates the possibility of cross-contamination of dirty gas or air with the engine oil, keeping the oil pure and performing optimally.
AMS-Oiler
high-tech oil pre-charger |
||
AMS-Oiler Approximate Dimensions |
||
AMK-01 | 7.40 x 2.50 x 2.50 inches | Diagram: (JPG - 30K) (PDF 1.01M) |
AMK-02 | 7.90 x 2.50 x 2.50 inches | Diagram: (JPG - 32K) (PDF 679K) |
Technical
Data |
|
Current Draw | 1 AMP |
Spring pressure | Normal 35 psi |
Spring force | Fully retracted 100 lbs. Fully extended 15lbs |
Solvent compatibility | Gasoline: Yes; Diesel Fuel: Yes; Soot Rich Oil: Yes |
Oil discharge volume | 160 cubic centimeters |
Recommended viscosity | All motor oil grades |
Operating temperatures | -30°F to 120°F |